Commercial Steel Buildings · United States

2,880 m² Showroom & Workshop

Detailed in Tekla, fabricated off-site and erected as a single 96 m envelope — with the frame re-engineered three times before the first member was cut.

2,880 m²Gross floor area
30 mClear span
7.5 mEaves height
0 membersRe-fabricated

Project Facts

Facts a contractor checks first: Commercial · showroom & workshop in United States — Structural steel portal frames, 96 × 30 × 7.5 m · 2,880 m².

Project facts and specifications
IndustryCommercial · showroom & workshop — client-facing retail plus service floor
Construction typeStructural steel portal frames — hot-dip galvanised, bolted on site
Project scale96 × 30 × 7.5 m · 2,880 m² — single envelope, two occupancies
LocationNorth America, United States — regional industrial corridor
CollaboratorsClient · lead general contractor · architect · civil engineer · third-party installer — five-party coordination
DeliveryOn programme — three design revisions absorbed, no extension of time
Our scopeTekla 3D model · galvanised steel package · purlins & girts · roof cladding · roof safety mesh & insulation · cantilever canopy · apron cladding · glazing beam to showroom · gantry crane support · showroom façade steelwork · openings for client shutters · personal access doors

Project Overview

A coordination-first approach taken because the architectural brief — not the structure — kept moving.

SynJect delivered a 2,880 m² structural steel envelope for a combined showroom and workshop in the United States — one portal-framed building carrying two very different functions under a single roof: a client-facing showroom at the front, a working service floor behind it.

The brief stayed live throughout design. Internal layouts for the showroom, reception and kitchen were revised as the tenant's requirements firmed up, and fire-engineering requirements were finalised only mid-design. Both changes landed on the structural frame itself — column positions, bracing and protection — not just on finishes.

Rather than freeze the frame and absorb the change on site, our engineers re-ran the structural design alongside each revision. Column sections were resized, bracing re-checked and fire-compliance elements reworked inside the same Tekla model. Fabrication was deliberately held back until the geometry stopped moving.

The building was erected on programme with no members re-fabricated and no extension of time claimed. The final frame also gave the client slimmer columns through the showroom and reception — the same structural capacity on a smaller visible footprint, which is what the architect had asked for from the start.

Hero — 2,880 m² Showroom & Workshop in United States, completed steel structure

Four Decisions That Made It Work

01

Parallel Design Iteration

Each layout revision was modelled and re-checked in the same week, so the frame never fell behind the architectural brief.

02

Fabrication Held Back

Steel was released to the shop only once geometry froze — which is why three revisions produced zero re-fabricated members.

03

Column Sections Re-Sized

Sections were sized against the real spans and loads of the final plan, giving slimmer columns exactly where the client sees them.

04

Façade Detail Resolved Early

Cantilever canopy, apron cladding and glazing beam were detailed as one steel package instead of being solved on site.

Client Testimonial

Feedback from Daniel Whitfield after handover of the United States project.

SynJect fabrication and installation team on site in front of the completed showroom and workshop building
Fabrication and installation team on site
“

They reworked the frame three times without touching the programme — and gave us slimmer columns exactly where the client sees them.

Daniel WhitfieldProject Director · Commercial Development Group
Zero re-fabricationDelivered on programme3 revisions absorbed

Frequently Asked Questions

The questions developers and contractors ask before committing to a combined showroom and workshop.

What does the 2,880 m² floor area include?

The 2,880 m² is the gross floor area of the single steel envelope — 96 m long by 30 m wide — covering the showroom, the workshop floor and the service bays. The cantilever canopy, apron and external hardstand sit outside that figure. It is the area a tenant can occupy and work in, not the roof area.

By keeping the structural model ahead of the drawings rather than behind them. Each layout revision was re-modelled and re-checked in the same cycle, and steel was released to the shop only after the geometry froze. Releases then followed erection order, so crews were never waiting on members that were about to change. Three revisions produced zero re-fabricated steel and no extension of time.

Sections were re-sized against the actual spans and load combinations of the final layout, not carried over from the early scheme. Bracing was re-checked at the same time, because a lighter column changes how the frame distributes lateral load. The governing limits are deflection and fire performance rather than simple strength. That is why the reduction was engineered member by member — not specified as a blanket downsize.

Yes, and it is usually the more economical route. The showroom needs glazing, façade steelwork and a finish standard the public sees; the workshop needs clear span, gantry crane support and hard-wearing service bays. Both sit inside one portal frame with a separating wall, which means one foundation package, one erection programme and one steel order instead of two.

Fire resistance requirements were confirmed after the internal layouts had already been revised, which changed both the protection strategy and some bracing locations. Those elements were reworked in the model before fabrication started, so the change was absorbed as design rather than as site rework. No additional steel was required and no time was lost on the programme.

Get Your 24-Hour BOQ and Cost Plan

See how much steel tonnage and ocean freight you can save before fabrication begins

8–15%

Steel Weight Savings

1:1 Tekla 3D modeling optimizes beam-column ratios to eliminate redundant material costs.

0.0mm

Zero-Clash Code Verification

Checked against EN 1090 and local wind/seismic loads.

100%

Engineer-to-Engineer Review

Verified by our lead engineers—Zero pushy sales calls, Just actionable data and factory price.

CE EN 1090-1•ISO 9001•ISO 14001•ISO 45001

Engineering & Inquiry Desk

Lead Engineers Online

Drawings
Drawings

🔒 100% Private and Secure, No Spam