Solar Power Solutions · Peninsular Malaysia

150MW Utility-Scale Solar PV

Fabricated in Tropical Plains. Zn-Al-Mg coating, bolted trial assembly. Handed over 28 Days Ahead of TNB COD Deadline.

150 MWpInstalled Capacity
8,500 tSteel Tonnage
42 m/sWind Rating
28 DaysDelivered Early

Project Facts

The commercial and technical facts a contractor checks before requesting drawings.

Project facts and specifications
IndustryUtility-Scale Ground Solar PV & CSP Mountings
LocationTropical Plains, Peninsular Malaysia
Project Scale150MWp Capacity (~8,500 Tons Structural Steel)
Design & Execution100% Pre-Drilled Slotted Bolting (0% Field Welding)
Service EnvironmentZinc-Aluminum-Magnesium (Zn-Al-Mg $310\text{g/m}^2$)
Delivery ResultHanded over 28 Days Ahead of TNB COD Deadline
Our ScopeFabrication, Zn-Al-Mg coating, bolted trial assembly and delivery

Project Overview

How the structure was engineered, fabricated and delivered in Tropical Plains.

Situated across expansive tropical laterite plains in Malaysia, this mega renewable energy complex integrates high-density utility solar PV arrays with an industrial parabolic trough solar thermal (CSP) demonstration loop.

For the EPC consortium, commercial viability hinged on the non-negotiable Commercial Operation Date (COD) set by utility off-taker Tenaga Nasional Berhad (TNB).

In utility-scale solar, missing the grid-connection window triggers severe liquidated damages (LAD) and jeopardizes long-term Power Purchase Agreement (PPA) tariffs.

Dimensions, codes, inspection rates and schedule outcomes for this project are recorded in the Project Facts table above, so they can be checked before an enquiry is issued.

150MW Utility-Scale Solar PV & CSP Hybrid Mountings in Malaysia: C5-M Marine-Grade Anti-Corrosion, Storm Wind-Uplift Rigidity, and Fast-Track TNB Grid Connection

Four Decisions That Made It Work

01

Zn-Al-Mg Cut-Edge Self-Healing Defense

Utilizing high-grade Zn-Al-Mg alloy steel with exceptional chloride and humidity barrier properties, forming a dense protective film that self-heals cut ed

02

Micro-Crack Resistant Torsional Rigidity

Engineered triangulated cold-formed framing with deep-flange purlins, suppressing dynamic fluttering under severe tropical squalls to protect delicate sola

03

$\pm 1.0\text{mm}$ Sub-Millimeter CSP Ther

Parabolic mirror frames feature thermal-expansion decoupling bearings, maintaining laser-guided focal concentration under extreme heat cycling.

04

Foolproof Slotted Fast-Track Erection

All connection plates feature CNC-machined slotted holes with embedded calibration marks, enabling local unskilled labor to erect tables rapidly without fi

Client Testimonial

Feedback recorded from the client after handover.

Fabrication and installation team at project handover
“

Missing TNB's grid COD means crippling liquidated damages, while tropical moisture rusts cheap brackets fast. Shijie eliminated all risk: 8,500 tons of Zn-Al-Mg solar steel bolted aloft with zero welding, resisting violent storm gusts with zero panel micro-cracks. Handing over 28 days early secured our PPA tariffs effortlessly.

Ahmad RazakProject Director, Renewable Energy EPC Consortium (Malaysia)
150 MWp8,500 t42 m/s

Frequently Asked Questions

Answers engineers ask before committing to a scope like this.

What was supplied for this Malaysian renewable project?

About 8,500 tons of structural steel for a 150MWp utility-scale ground-mounted solar array combined with an industrial parabolic trough CSP demonstration loop, on tropical laterite plains in Peninsular Malaysia.

Because the failure mode in tropical humidity is red rust starting at cut edges and punched holes. Zinc-aluminium-magnesium alloy at 310 g/m2 forms a dense protective film that self-heals at exposed cut edges, which is where standard galvanizing gives up first.

Triangulated cold-formed framing with deep-flange purlins limits dynamic table deflection to 1/250 under 42 m/s gusts. The bracing resists the fluttering that repeated wind suction induces – a static wind check alone does not capture it.

Parabolic mirror frames are aligned to within plus or minus 1.0mm on the focal line, with thermal-expansion decoupling bearings maintaining that alignment through daily heat cycling. A concentrated solar field loses output when the frame moves, so tolerance is a performance spec.

Yes. All connection plates have CNC-machined slotted holes with embedded calibration marks, so crews assemble without field cutting or torches. The array was handed over 28 days ahead of the TNB commercial operation date, which is the deadline that carries liquidated damages.

Get Your 24-Hour BOQ and Cost Plan

See how much steel tonnage and ocean freight you can save before fabrication begins

8–15%

Steel Weight Savings

1:1 Tekla 3D modeling optimizes beam-column ratios to eliminate redundant material costs.

0.0mm

Zero-Clash Code Verification

Checked against EN 1090 and local wind/seismic loads.

100%

Engineer-to-Engineer Review

Verified by our lead engineers—Zero pushy sales calls, Just actionable data and factory price.

CE EN 1090-1•ISO 9001•ISO 14001•ISO 45001

Engineering & Inquiry Desk

Lead Engineers Online

Drawings
Drawings

🔒 100% Private and Secure, No Spam