Industrial Steel Buildings · Qatar

15,000 m² Component Factory, Qatar

A six-bay portal frame keeps machining, welding, sub-assembly and dispatch under one uninterrupted roof in Qatar.

15,000 m²Under roof
6 baysRepeated portal frames
1,180 tStructural steel
31 weeksOn site

Project Facts

Facts a contractor checks first: Motorbike component manufacturing - Single-storey multi-bay portal frame with separate entrance block, 15,000 m² under roof, six repeated bays.

Project facts and specifications
IndustryMotorbike component manufacturing - machining, welding, sub-assembly and dispatch on one floor
Construction typeSingle-storey multi-bay portal frame with separate entrance block - warm off-white cladding, pale olive-grey bands, silver-grey roof
Project scale15,000 m² under roof, six repeated bays - 1,180 t of fabricated structural steel
LocationDesert-edge industrial zone, Qatar - pale gravel ground, high solar gain and airborne dust
CollaboratorsProduction-line supplier · local civil works - frame set around the component line sequence
Delivery31 weeks on site - lines commissioned before the entrance block handover
Our scopeStructural design and 3D modelling · six repeated portal-frame bays · secondary steel and bracing · roof sheeting and translucent daylight strips · wall cladding with ribbon window bands · curved-canopy entrance block · gutters and downpipes · erection drawings and site support

Project Overview

A component line changes layout more often than a building changes frame.

SynJect supplied 1,180 tonnes of structural steel for a 15,000 m² motorbike component factory in Qatar, built as six repeated portal bays under one low-pitched roof. Machining, welding, sub-assembly and dispatch share a single floor, so trolleys and line services run across the hall without a change in level.

The frame follows the line sequence. Continuous ribbon window bands light the long walls, while a separate entrance block with a curved canopy anchors the office and visitor side of the building and keeps deliveries away from the production doors.

The desert-edge site drives the detailing: a sealed light-coloured envelope against heat and dust, translucent roof-light strips that cut daytime lighting load, and galvanized steel on every exposed frame, railing and canopy support.

Completed 15,000 m² motorbike component factory in Qatar seen from the access road, warm off-white cladding with pale olive-grey bands and a silver-grey low-pitched roof

Four Decisions That Made It Work

01

Repeated Bays

Six identical portal bays let the line move without re-engineering the frame.

02

Low-Pitched Roof

A shallow roof fall keeps the volume tight and drainage runs short.

03

Daylight By Default

Ribbon windows plus roof-light strips keep the working floor bright.

04

Sealed Against Dust

Light-coloured sealed cladding and covered entries suit a desert-edge site.

Client Testimonial

Feedback from Plant Project Manager after handover.

SynJect erection crew in hard hats holding a red company banner on the pale gravel forecourt of the motorbike component factory in Qatar
Fabrication and installation team on site
“

We moved the welding cell twice before commissioning. Because the bays were identical, the steel never became the reason we could not.

Plant Project ManagerMotorbike component manufacturer, Qatar
15,000 m² under one roofSix repeated portal bays1,180 t of fabricated steel

Frequently Asked Questions

Common questions from buyers specifying this building type.

How is a 15,000 m² motorbike component factory in Qatar quoted?

A 15,000 m² motorbike component factory in Qatar is quoted against an itemised bill of quantities rather than a flat rate per square metre, because bay spacing, eave height, wind and thermal assumptions, coating specification and delivery distance all change the steel tonnage that SynJect has to fabricate. The BOQ separates primary frames, secondary steel, roof and wall sheeting, trims, fasteners and coatings so each line can be compared between bidders. Send SynJect the bay layout, eave height and site location and the quantities come back itemised against those inputs.

The steel package for the 15,000 m² component factory in Qatar covers structural design and 3D modelling, six repeated portal bays, secondary steel, roof sheeting, wall cladding with the ribbon window bands, trims, gutters, downpipes and the curved-canopy entrance block as one coordinated supply. Earthworks, foundations, the ground-floor slab, internal partitions, utilities and production equipment sat outside that package on this project. The table below shows the boundary as it was applied on the delivered plant. In the steel package Outside the package Six portal bays, bracing and secondary steel Earthworks, foundations and ground-floor slab Roof sheeting, wall cladding, window bands, trims Internal partitions, MEP and fire services Curved-canopy entrance block and canopies Machining cells, welding plant and conveyors 3D model, shop drawings and erection drawings Local erection labour, cranes and permits

A steel factory in Qatar is designed to the local authority load requirements together with internationally recognised steel design standards for the frames, connections and coatings. For the delivered 15,000 m² component plant, the design basis recorded the Gulf wind exposure, high ambient temperature range and the thermal movement assumed across the long wall runs. Every SynJect project is modelled in 3D before fabrication, so connection schedules and code checks stay traceable from model to shop drawing. Ask for the design basis report with the BOQ and the assumptions are visible before cutting starts.

Fabrication, shipping and erection for a Qatar factory project run as one coordinated sequence: SynJect fabricates and trial-assembles the frames at the works, ships members in erection order, and hands the site team a crane study plus marked erection drawings before the first lift. On this plant, erection began at the entrance end so the canopy block went up first and the delivery side stayed live. The sequencing plan, crane study and erection drawings are part of the SynJect package, so local contractors price lifts against drawings.

Repeated portal bays suit motorbike component production because machining, welding and sub-assembly cells are resized every model year, and identical bays let a cell move without a structural review. Six bays also keep rafter sections and connection details standard across the 15,000 m² hall in Qatar, which simplifies fabrication and future spares. A single very large span would remove more columns but would raise steel weight and make every future layout change a structural question. Standard bays also let the roof-light strips and window bands repeat bay by bay, so daylight stays even along the line.

Heat, dust and daylight in the delivered Qatar hall are handled by the envelope: sealed light-coloured wall cladding with gasketed trims, covered entries at the curved canopy, and translucent roof-light strips set between the rafters. The pale finish reflects solar gain, while continuous ribbon window bands keep the working floor bright through the day. The roof-light strips were fixed in the 3D model before fabrication, so they never clash with purlins or bracing. Ventilation equipment is a local services package, but the ridge zone was kept clear for future extract points.

The ground-floor slab and equipment foundations under a component line sit outside the SynJect steel package and are poured by the local civil contractor against our hold-down details. On the Qatar plant, machining cell loads, joint layout and flatness class were agreed between the two packages before the slab was specified. The production equipment sets those tolerances, not the frame, so the line supplier has to sign them off early. Request the interface drawing set with the BOQ and the steel-to-slab boundary becomes unambiguous.

The 15,000 m² figure covers everything under roof on the delivered project in Qatar: the six repeated portal bays housing machining, welding, sub-assembly and dispatch, plus the separate curved-canopy entrance block with its office and welfare rooms. External yard areas, access roads and the gravel drainage strip are excluded from that number. Quoting area this way makes bids directly comparable, because one supplier cannot hide the entrance block outside the total. Ask any bidder to split hall and entrance areas in the same manner before comparing tonnages.

The separate curved-canopy entrance block on this Qatar factory keeps visitors, offices and welfare rooms away from the production doors, so people never cross the component logistics route. Structurally it is a light secondary frame tied to the main portal line, with oxide-brown door frames set against the warm off-white cladding. The canopy also shades the glazed entrance from low-angle desert sun without adding a full-height awning along the hall. Because it sits outside the bay repetition, the block could be handed over after the lines were commissioned.

The Qatar component hall can be extended by repeating another portal bay at the gable end, because the end frame was detailed as a removable future-extension frame rather than a permanent braced wall. Roof sheeting, window bands and purlin centres all run to the same grid, so a new bay continues the envelope without a step in roof line. SynJect recorded the extension assumptions in the design basis, including the extra bay load and the future downpipe position. Confirm the extension bay in the first BOQ and the end-frame connections are fabricated ready for it.

Get Your 24-Hour BOQ and Cost Plan

See how much steel tonnage and ocean freight you can save before fabrication begins

8–15%

Steel Weight Savings

1:1 Tekla 3D modeling optimizes beam-column ratios to eliminate redundant material costs.

0.0mm

Zero-Clash Code Verification

Checked against EN 1090 and local wind/seismic loads.

100%

Engineer-to-Engineer Review

Verified by our lead engineers—Zero pushy sales calls, Just actionable data and factory price.

CE EN 1090-1•ISO 9001•ISO 14001•ISO 45001

Engineering & Inquiry Desk

Lead Engineers Online

Drawings
Drawings

🔒 100% Private and Secure, No Spam