Home / Products / Space Frame Structure / Primary Structural System

Primary Structural System

Steel columns forming the primary structural system of a space frame structure
Welded H-section columns with shop-welded base plates and crane corbels supplied for a space frame structure

Space Frame Steel Columns

Steel columns are the main vertical load-bearing components in steel structure workshops, warehouses, super high-rise, and large-span buildings. They bear the axial force, bending moment, and shear force transmitted from steel beams, roof panels, floor slabs, and crane beams, reliably transferring the load to the foundation. By section form, they can be divided into H-beam columns, welded box (rectangular tube) columns, circular tube columns, cruciform columns, and latticed columns; by stress characteristics, they are divided into axially loaded columns, frame columns, and bent columns. Prefabricated in the factory and assembled on-site via bolts or welding, steel columns feature light dead weight, high strength, and fast construction speed. As the vertical force-bearing skeleton of steel buildings, they are widely used in industrial plants, warehousing logistics, public venues, super high-rises, and bridge engineering.

Technical Specifications

Parameter Specification
Common Section Forms H-beam, welded box, circular tube, cruciform, latticed
Common Materials Q235B, Q355B, Q390B, Q420B
Section Height Range mm ~ 1500mm (customizable for larger sections)
Plate Thickness Range mm ~ 50mm
Single Segment Length m ~ 15m (segmented due to transport limits)
Connection Method High-strength bolt connection, full penetration welding, bolt-weld mixed connection
Column Base Form Hinged (flat plate bearing), Rigid (exposed/embedded/encased)
Anti-corrosion Treatment Sandblasting Sa2.5 + Epoxy/Alkyd paint, or Hot-dip galvanizing
Fire Protection Fireproof coating, fireproof board, concrete encasement
Execution Standard GB 50017 "Standard for Design of Steel Structures", GB 50205 "Standard for Acceptance of Construction Quality of Steel Structures"

Values are the range we fabricate routinely. Project-specific sizes, grades and coating systems are confirmed on the approved shop drawing before release to production.

Advantages vs Engineering Considerations

Advantages Engineering Considerations
Lightweight, high bearing capacity: Under the same load, the weight is only 1/3~1/2 of concrete columns, significantly reducing foundation cost and increasing usable headroom. Requires anti-corrosion treatment: Steel is prone to rust; must undergo derusting + painting or hot-dip galvanizing based on the environment. Coastal/chemical areas require thicker coatings.
Prefabricated in factory, efficient construction: Standardized production and on-site bolt assembly shorten the schedule by about 1/3 compared to concrete structures. Requires fire protection: Steel's mechanical properties degrade rapidly at high temperatures; fireproof coatings or cladding are mandatory according to fire resistance ratings.
Excellent seismic performance: Good plasticity and toughness of steel can absorb and dissipate energy during earthquakes, providing high structural ductility. High installation precision required: Column base elevation and verticality must be strictly controlled, which can be met through mature construction techniques.
Flexible section selection: H-shape, box, circular tube, and latticed columns can be customized to adapt to various loads and architectural designs. Slenderness ratio must be controlled: Columns with a high slenderness ratio require professional calculation and bracing systems, guaranteed by design institute verification.
Recyclable: High material recovery rate after demolition, aligning with green building and circular economy directions. Cost affected by steel market fluctuations: Material costs can be controlled via advance price locking and comparing multiple steel mills.

Frequently Asked Questions

What are the types of steel columns?

By section: H-beam, box, circular tube, cruciform, latticed columns; by force: axially loaded, frame, and bent columns.

Under equal bearing capacity, steel column weight is about 1/3~1/2 of concrete, significantly reducing foundation size and embedment depth.

Q235B and Q355B for industrial plants; Q390B and Q420B for high-rises and heavy-duty structures.

Hinged base (flat plate bearing) and rigid base (exposed, embedded, encased), determined by structural calculations.

By fixing the base plate with embedded anchor bolts, followed by secondary non-shrink grouting for leveling; shear keys may be required depending on the structure.

Flange full penetration groove welding + web high-strength bolt connection, or fully bolted, or fully welded.

Sandblasting to Sa2.5, coating with epoxy/alkyd paint (total dry film thickness designed per environment class), or overall hot-dip galvanizing.

Apply thin or thick intumescent/fireproof coatings according to fire resistance ratings, or clad with fireproof boards or concrete.

Suitable for large load, large span, and large slenderness ratio columns, such as trestles, pipe supports, and heavy-duty plant columns.

Per GB 50205, single-tier column verticality deviation is H/1000 and ≤25mm; multi-tier columns are controlled per tier.

Space FramePipe Strut

Space Frame Pipe Strut

Space Frame Pipe Struts are the basic force-bearing units in spatial structures like trusses, reticulated shells, and towers. They are usually two-force members hinged at both ends, bearing axial forces (tension or compression). The cross-section is primarily circular tube; common materials include Q235B, Q355B, and Q390B. Members are connected into a holistic structure via nodes (Bolted Ball, welded hollow steel ball, intersecting tubular joints, etc.), widely used in large-span roofs (stadiums, airports, platforms), transmission towers, broadcasting towers, trestles, and pipe supports.

Technical Specifications

Parameter Specification
Common Sections Circular tube φ48×3~φ299×18
Material Q235B, Q355B, Q390B
Node Forms Bolted sphere nodes, welded sphere nodes, tubular intersecting nodes, plate nodes
Stress Characteristics Primarily axial force (tension or compression)
Slenderness Ratio Tension members ≤220, compression members ≤180 (per codes)
Connection Method Welding, bolting, intersecting cutting welding
Anti-corrosion Sandblasting + paint, or hot-dip galvanizing
Applicable Structures Trusses, space frames, reticulated shells
End Processing Welded cone head/sealing plate, intersecting cutting
Execution Standard GB 50017, JGJ 7 “Technical specification for space frame structures”

Values are the range we fabricate routinely. Project-specific sizes, grades and coating systems are confirmed on the approved shop drawing before release to production.

Advantages vs Engineering Considerations

Advantages Engineering Considerations
Rational stress distribution: Two-force member sections only bear axial force, maximizing material utilization. Complex nodes: Intersecting cutting and spherical node processing require high precision.
Light dead weight: Truss structures save over 30% steel compared to solid-web beams. High installation precision required: Member length and node position deviations directly affect assembly.
Suitable for large spans: Can achieve large-span roofs over 50m. High anti-corrosion/fire protection requirements: Spatial structures have complex surfaces, making coating construction difficult.
Factory prefabrication: Standardized factory production, on-site assembly. Node fatigue needs attention: Node welds easily crack under repeated loads; fatigue verification is needed.
Aesthetically pleasing: Can form various spatial curved surfaces and architectural shapes. Relatively high cost: Processing and installation fees are higher than ordinary steel beams.

Frequently Asked Questions

What is a Space Frame Pipe Strut?

The basic force-bearing unit in spatial structures like trusses, space frames, and reticulated shells, mostly acting as two-force members.

Circular tubes are most common for space frames; trusses can also use square tubes, double angles, or H-beams.

Primarily axial forces (tension or compression), with very small bending moments.

Bolted sphere nodes, welded sphere nodes, intersecting nodes, and plate nodes.

Tension space frame pipe strut generally ≤220, compression space frame pipe strut ≤180.

Welded with space frame cone/space frame sealing plate, or directly welded to nodes via intersecting line cutting.

Q235B, Q355B, Q390B; Q420 can be used for large spans and heavy loads.

Sandblasting + epoxy/alkyd paint; outdoor applications can also use hot-dip galvanizing.

Length deviations and node position deviations must be strictly controlled, otherwise assembly fails.

Steel-saving, suitable for large spans, flexible styling, though processing and installation costs are higher.

Qualification Certificate

Your projects are protected by world-class standards. From CE (EN 1090) to ISO 9001, our qualifications are not just paper—they are the rigorous daily reality on our shop floor.

AISCCEOTCInternational Welder
ISO 9001 Quality Management System

Have drawings or a BOQ ready?

SynJect
SynJect factory
SynJect factory
SynJect factory
Kunlun Lu
SynJect factory
SynJect factory
SynJect factory
SynJect factory
SynJect factory

SynJect:Scale. Precision. Certainty.

SYNJECT delivers comprehensive steel structure solutions engineered for the global value chain. From investors seeking ROI to engineers demanding exact compliance, we transform complex blueprints into robust realities—on time and without friction.

From Blueprint to Site. Zero Friction.

Detailed Engineering & Shop Drawing DevelopmentNesting & Material OptimizationRaw Material Incoming InspectionCNC Cutting & Edge PreparationWeld Distortion StraighteningNon-Destructive Testing (NDT)Trial Assembly & Shop AlignmentSurface Preparation & Protective CoatingMeasure Paint Film ThicknessFinal Quality Inspection & CertificationExport Packaging & Logistics ProtectionGlobal Field Erection & Site Management
Stage.01

Detailed Engineering

Utilizing advanced BIM platforms such as Tekla Structures, detailed 3D modeling and shop drawings are executed strictly in compliance with AISC 360 or Eurocode 3 (EN 1993). Connection designs are rigorously verified, with manufacturing drawings generated to ISO 2768-m tolerance standards. 100% clash detection with primary architectural and MEP systems is performed to ensure zero structural conflicts during field erection.

STANDARDAISC 360 / EN 1993
METRIC VALUETolerance ±0.01mm
Stage.02

Nesting & Material Optimization

Intelligent nesting layouts are performed using advanced software like FastCAM/SigmaNEST in accordance with EN 10029 / ASTM A6 dimensional standards. Accounting for cutting kerf (2mm–5mm depending on plate thickness) and thermal contraction allowances, raw material utilization exceeds 92%. Offcuts are digitally barcode-tracked to ensure 100% mill test report (MTR) traceability.

STANDARDEN 10029 / ASTM A6
METRIC VALUEUtilization 95%
Stage.03

Raw Material Incoming Inspection

All structural steel (Q355B/C/D, ASTM A572 Gr.50, S355JR/J2) must be accompanied by EN 10204 3.1 Mill Test Reports (MTR). Incoming quality control conducts 100% dimensional and visual inspections under ASTM A6 / EN 10029, verifying thickness tolerances (Class A/B) and internal lamination integrity via Ultrasonic Testing (UT) to ASTM A435. Chemical composition and mechanical properties are spot-verified by accredited 3rd-party labs.

STANDARDEN 10204 3.1 / ASTM A435
METRIC VALUEClass A/B and ASTM A435
Stage.04

CNC Cutting & Edge Preparation

Plate profiling and component cutting are executed via CNC oxy-fuel, high-definition plasma, and multi-kW fiber laser equipment. Cut surface quality strictly complies with EN ISO 9013 for perpendicularity and surface roughness ±2.5°, Range 3/4 tolerance. Multi-axis CNC beveling machines execute weld prep bevel angles within ±2.5° and root face dimensions within ±1.0 mm.

STANDARDEN ISO 9013
METRIC VALUERa ≤12.5μm
Stage.05

Weld Distortion Straightening

Welding is performed exclusively by AWS D1.1 or EN ISO 9606 certified welders using qualified Welding Procedure Specifications (WPS) supported by Procedure Qualification Records (PQR) per AWS D1.1 / ISO 15614. Submerged Arc Welding (SAW) and Flux-Cored Arc Welding (FCAW) dominate Complete Joint Penetration (CJP) and fillet welds. Heat input is strictly controlled, achieving weld quality levels conforming to ISO 5817 Quality Level B or AWS D1.1 standards.

STANDARDAWS D1.1 / EN ISO 9606
METRIC VALUEISO 5817Level B
Stage.06

Non-Destructive Testing (NDT)

Post-weld angular distortion, camber, and sweep are rectified using automated hydraulic flange straighteners and controlled thermal flame straightening. Heating temperatures for High-Strength Low-Alloy (HSLA) steels are strictly maintained between 600℃ - 650℃ (air-cooled, zero water quenching) to prevent microstructural degradation. Post-straightening straightness tolerances meet ±3 mm, conforming to EN 1090-2 Execution Class 2 (EXC2) and AISC COSP standards.

STANDARDEN 1090-2 EXC2 / AISC COSP
METRIC VALUETolerances ±3 mm
Stage.07

Trial Assembly & Shop Alignment

NDT protocols are operated by ISO 9712 / ASNT Level II certified NDT personnel. 100% of critical Complete Joint Penetration (CJP) welds undergo Ultrasonic Testing (UT per ISO 17640 / ASTM E164) or Magnetic Particle Testing (MT per ISO 17638 / ASTM E709). Radiographic Testing (RT) is applied as requested for heavy sections. Weld acceptance conforms strictly to ISO 11666 Acceptance Level 1 or AWS D1.1 criteria.

STANDARDISO 11666 Level 1 / AWS D1.1
METRIC VALUE100% UT
Stage.08

Surface Preparation & Protective Coating

Complex geometries, long-span trusses, and heavy framing undergo 1:1 physical trial assembly or high-precision 3D laser scanning virtual assembly per EN 1090-2 / AISC requirements. Bolt hole alignment is verified (≥ 95% free-pass rate for high-strength bolts), and critical dimensions (span, camber, 3D spatial alignment) are verified within tight tolerance limits (±2.0 mm) to eliminate site fitting risks.

STANDARDAISC / EN 1090-2
METRIC VALUETolerance ±2.0 mm
Stage.09

Measure Paint Film Thickness

Structural members undergo automated shot blasting to achieve SSPC-SP10 / NACE No. 2 / ISO 8501-1 Sa 2.5 cleanliness, with a surface profile (anchor depth) of 45–75μm. High-performance protective coatings are applied using airless spray technology in compliance with ISO 12944 (C3 to CX corrosive environments), featuring Inorganic/Organic Zinc-Rich Epoxy Primers, Epoxy Micaceous Iron Oxide Intermediate coats, and Polyurethane/Fluorocarbon Topcoats. Dry Film Thickness (DFT) is verified using calibrated magnetic gauges adhering strictly to the 90/10 rule.

STANDARDISO 8501-1 Sa 2.5 / ISO 12944
METRIC VALUE45 - 75μm
Stage.10

Final Quality Inspection & Certification

Final Quality Control (FQC) performs a comprehensive holistic audit, inspecting paint aesthetics (zero runs, pinholes, sagging), critical geometry, bolt hole pitches, and laser/stenciled component mark traceability. A complete Manufacturing Data Report (MDR)—comprising MTRs, NDT records, coating inspection logs, and Certificates of Conformance—is compiled to support CE Marking (DoP under EN 1090) and AISC final acceptance.

STANDARDEN 1090 / AISC
METRIC VALUEQA/QC Final Release
Stage.11

Export Packaging & Logistics Protection

Protective packaging is engineered for containerized (40HQ/OT/FR) and breakbulk ocean freight under heavy maritime transit conditions. Structural members are bundled on heavy-duty steel skids with high-tensile steel strapping. Machined connections and contact surfaces are wrapped with VCI anti-corrosion film, EPE foam padding, and heavy rubber cushions. All timber packing complies fully with ISPM 15 phytosanitary standards and IMO Cargo Stowage and Securing (CSS) rules.

STANDARDISPM 15 / IMO CSS
METRIC VALUE40HQ/OT/FR
Stage.12

Global Field Erection & Site Management

We deliver international site erection supervision and turnkey EPCM construction services adhering to OSHA 1926 safety protocols, AISC COSP, and EN 1090-2 erection standards. Field teams, led by multilingual HSE and QA/QC engineers, utilize high-precision total stations to maintain structural plumbness within H/1000 (≤25mm max). High-Strength Structural Bolting is executed via calibrated Wrench or Turn-of-Nut methods with 100% torque audit documentation.

STANDARDOSHA 1926 / EN 1090-2
METRIC VALUE≤ H/1000

Get Your 24-Hour BOQ and Cost Plan

See how much steel tonnage and ocean freight you can save before fabrication begins

8–15%

Steel Weight Savings

1:1 Tekla 3D modeling optimizes beam-column ratios to eliminate redundant material costs.

0.0mm

Zero-Clash Code Verification

Checked against EN 1090 and local wind/seismic loads.

100%

Engineer-to-Engineer Review

Verified by our lead engineers—Zero pushy sales calls, Just actionable data and factory price.

CE EN 1090-1•ISO 9001•ISO 14001•ISO 45001

Engineering & Inquiry Desk

Lead Engineers Online

Drawings
Drawings

🔒 100% Private and Secure, No Spam