4,717 m² Grain Storage Shed
An 89 × 53 m clear-span envelope, modelled in 3D and delivered fully hot-dip galvanised — sized to swallow 90–110 t/h of harvest intake without a truck queue at the door.
Données du projet
Facts a contractor checks first: Agricultural & Bulk Storage · grain store in Egypt — Clear-span steel portal frame, 89 × 53 × 9.5 m · 4,717 m².
| Industrie | Agricultural & Bulk Storage · grain store — harvest buffer + off-season machinery |
|---|---|
| Type de construction | Clear-span steel portal frame — hot-dip galvanised, bolted on site |
| Ampleur du projet | 89 × 53 × 9.5 m · 4,717 m² — 3.2 m grain-retaining wall base |
| Lieu | North Africa, Egypt — irrigated delta farmland |
| Collaborateurs | Farming group · structural engineer · precast supplier · erection crew — four-party coordination |
| Livraison | Single-phase handover — ahead of the wheat harvest |
| Notre champ d'action | Tekla 3D model · hot-dip galvanised steel package · purlins & girts · roof and wall cladding · gutter and downpipe system · roof safety mesh · insulation · sliding doors · precast concrete panels · skylights · personal access doors · base flashings · intermediate mullions |
Présentation du projet
A drive-through grain store, shaped by intake rate and a permitting delay rather than by tonnage.
SynJect delivered a 4,717 m² structural steel grain storage shed in Egypt — an 89 × 53 × 9.5 m clear-span envelope with a 3.2 m grain-retaining wall base, built so the header never stops for a truck.
At 90–110 tonnes per hour, one combine fills a road train faster than the intake queue can clear. The 9.5 m eaves height was therefore driven by the angle of repose and loader reach, not by the site boundary — a taller shed buys far more usable cubic volume than a wider one.
Mid-design, the retaining strategy changed: rather than wait on a separate precast trade, we brought the precast panels and their intermediate mullions into our own scope, corrected purlin alignment and removed a set of unnecessary panel doors. Two trades became one line of accountability.
The permitting delay consumed the float, so the programme was rebuilt around off-site fabrication: every member arrived galvanised and numbered, and the erection crew closed the envelope before the wheat harvest. The shed now stores grain at peak and machinery off-season.

Quatre décisions décisives
Intake-Rate Sizing
Floor area and height were set against 90–110 t/h intake, not against a nominal tonnage figure.
Precast Brought In Scope
Retaining panels and mullions came under one supplier, collapsing two trades into a single programme.
Full-Height Door Bays
Both gable ends open to full eaves height so a road train tips forward and exits without reversing.
Skylight Band
Continuous roof skylights keep the interior lit through the day, so grain grading does not depend on luminaires.
Le projet réalisé
Completed envelope, empty clear span and full stockpiles — six views of the shed as handed over.






Témoignage du client
Feedback from Mahmoud El-Sayed after handover of the Egypt project.

We tip under cover, push the grain back and keep cutting. The queue at the door is gone.
Questions fréquentes
The questions growers and their engineers ask before committing to an on-farm grain store.
What does the 4,717 m² figure include?
The 89 × 53 m roofed envelope only. External hardstand, weighbridge and silo battery sit outside the steel package and are priced separately.
How is grain retained without full precast walls?
The lower purlins are spaced and sized for lateral grain pressure, and the sheeting is detailed with sealed laps over a 3.2 m base restraint. The load path runs through the girts into the portal frames — it is structural design, not a cosmetic substitute.
Why 9.5 m eaves rather than a wider footprint?
Grain stacks at its natural angle of repose, so usable volume grows faster with height than with floor area. The height also clears loader booms pushing grain back from the tipping point, and leaves room for machinery stored off-season.
Can road trains tip inside the shed?
Yes. The 53 m clear span has no internal columns and both gable ends open to full eaves height, so a vehicle enters, tips and exits forward without reversing in a congested yard.
Does this work for a smaller intake?
The variables are intake rate, tipping clearance and retention height, all of which scale down. A shorter bay with the same column-free span behaves identically. Fix the harvest logistics before the slab is poured, not after.
Obtenez votre devis et votre plan de coûts en 24 heures
Découvrez combien vous pouvez économiser en tonnage d'acier et en frais de transport maritime avant le début de la fabrication
Réduction du poids de l'acier
La modélisation 3D 1:1 dans Tekla optimise les rapports poutre-poteau afin d'éliminer les coûts liés aux matériaux superflus.
Vérification de code sans conflit
Vérifié conformément à la norme EN 1090 et aux charges locales dues au vent et aux séismes.
Revue d'ingénieur à ingénieur
Vérifié par nos ingénieurs en chef — Aucun appel commercial insistant, uniquement des données exploitables et des prix d'usine.
CE EN 1090-1•ISO 9001•ISO 14001•ISO 45001
Ingénieurs en chef en ligne
🔒 100 % confidentiel et sécurisé, sans spam