Agricultural Steel Sheds · Egypt

4,717 m² Grain Storage Shed

An 89 × 53 m clear-span envelope, modelled in 3D and delivered fully hot-dip galvanised — sized to swallow 90–110 t/h of harvest intake without a truck queue at the door.

4,717 m²Covered storage
53 mLuz libre
9.5 mEaves height
90–110 t/hHarvest intake

Datos del proyecto

Facts a contractor checks first: Agricultural & Bulk Storage · grain store in Egypt — Clear-span steel portal frame, 89 × 53 × 9.5 m · 4,717 m².

Datos y especificaciones del proyecto
SectorAgricultural & Bulk Storage · grain store — harvest buffer + off-season machinery
Tipo de construcciónClear-span steel portal frame — hot-dip galvanised, bolted on site
Envergadura del proyecto89 × 53 × 9.5 m · 4,717 m² — 3.2 m grain-retaining wall base
UbicaciónNorth Africa, Egypt — irrigated delta farmland
ColaboradoresFarming group · structural engineer · precast supplier · erection crew — four-party coordination
EntregaSingle-phase handover — ahead of the wheat harvest
Nuestro ámbito de actuaciónTekla 3D model · hot-dip galvanised steel package · purlins & girts · roof and wall cladding · gutter and downpipe system · roof safety mesh · insulation · sliding doors · precast concrete panels · skylights · personal access doors · base flashings · intermediate mullions

Descripción del proyecto

Compartir

A drive-through grain store, shaped by intake rate and a permitting delay rather than by tonnage.

SynJect delivered a 4,717 m² structural steel grain storage shed in Egypt — an 89 × 53 × 9.5 m clear-span envelope with a 3.2 m grain-retaining wall base, built so the header never stops for a truck.

At 90–110 tonnes per hour, one combine fills a road train faster than the intake queue can clear. The 9.5 m eaves height was therefore driven by the angle of repose and loader reach, not by the site boundary — a taller shed buys far more usable cubic volume than a wider one.

Mid-design, the retaining strategy changed: rather than wait on a separate precast trade, we brought the precast panels and their intermediate mullions into our own scope, corrected purlin alignment and removed a set of unnecessary panel doors. Two trades became one line of accountability.

The permitting delay consumed the float, so the programme was rebuilt around off-site fabrication: every member arrived galvanised and numbered, and the erection crew closed the envelope before the wheat harvest. The shed now stores grain at peak and machinery off-season.

Fachada frontal del almacén de cereales ya terminado, de 4.717 m², con revestimiento en blanco marfil y molduras de alero en bronce terracota, en Egipto

Cuatro decisiones clave

01

Intake-Rate Sizing

Floor area and height were set against 90–110 t/h intake, not against a nominal tonnage figure.

02

Precast Brought In Scope

Retaining panels and mullions came under one supplier, collapsing two trades into a single programme.

03

Full-Height Door Bays

Both gable ends open to full eaves height so a road train tips forward and exits without reversing.

04

Skylight Band

Continuous roof skylights keep the interior lit through the day, so grain grading does not depend on luminaires.

Testimonio del cliente

Feedback from Mahmoud El-Sayed after handover of the Egypt project.

SynJect fabrication and installation team holding a company banner in front of the completed grain storage shed in Egypt
Equipo de fabricación e instalación en la obra
“

We tip under cover, push the grain back and keep cutting. The queue at the door is gone.

Mahmoud El-SayedOperations Director · Delta Grain Logistics
90–110 t/h intake3.2 m retaining base100% bolted

Preguntas frecuentes

The questions growers and their engineers ask before committing to an on-farm grain store.

What does the 4,717 m² figure include?

The 89 × 53 m roofed envelope only. External hardstand, weighbridge and silo battery sit outside the steel package and are priced separately.

The lower purlins are spaced and sized for lateral grain pressure, and the sheeting is detailed with sealed laps over a 3.2 m base restraint. The load path runs through the girts into the portal frames — it is structural design, not a cosmetic substitute.

Grain stacks at its natural angle of repose, so usable volume grows faster with height than with floor area. The height also clears loader booms pushing grain back from the tipping point, and leaves room for machinery stored off-season.

Yes. The 53 m clear span has no internal columns and both gable ends open to full eaves height, so a vehicle enters, tips and exits forward without reversing in a congested yard.

The variables are intake rate, tipping clearance and retention height, all of which scale down. A shorter bay with the same column-free span behaves identically. Fix the harvest logistics before the slab is poured, not after.

Obtén tu presupuesto y plan de costos en 24 horas

Descubre cuánto puedes ahorrar en tonelaje de acero y en flete marítimo antes de que comience la fabricación

8–15%

Reducción del peso del acero

El modelado 3D 1:1 de Tekla optimiza las relaciones viga-columna para eliminar los costos de material redundante.

0,0 mm

Verificación de código sin conflictos

Se ha verificado de acuerdo con la norma EN 1090 y las cargas eólicas y sísmicas locales.

100%

Revisión de ingeniero a ingeniero

Verificado por nuestros ingenieros principales: sin llamadas de ventas agresivas, solo datos útiles y precio de fábrica.

CE EN 1090-1•ISO 9001•ISO 14001•ISO 45001

Mostrador de Ingeniería e Investigación

Ingenieros principales en línea

Dibujos
Dibujos

🔒 100 % privado y seguro, sin spam