Agricultural Steel Sheds · Egypt

4,717 m² Grain Storage Shed

An 89 × 53 m clear-span envelope, modelled in 3D and delivered fully hot-dip galvanised — sized to swallow 90–110 t/h of harvest intake without a truck queue at the door.

4,717 m²Covered storage
53 mСвободный пролет
9.5 mEaves height
90–110 t/hHarvest intake

Данные проекта

Facts a contractor checks first: Agricultural & Bulk Storage · grain store in Egypt — Clear-span steel portal frame, 89 × 53 × 9.5 m · 4,717 m².

Сведения о проекте и технические характеристики
ПромышленностьAgricultural & Bulk Storage · grain store — harvest buffer + off-season machinery
Тип конструкцииClear-span steel portal frame — hot-dip galvanised, bolted on site
Масштаб проекта89 × 53 × 9.5 m · 4,717 m² — 3.2 m grain-retaining wall base
МестоположениеNorth Africa, Egypt — irrigated delta farmland
СоавторыFarming group · structural engineer · precast supplier · erection crew — four-party coordination
ДоставкаSingle-phase handover — ahead of the wheat harvest
Сфера нашей деятельностиTekla 3D model · hot-dip galvanised steel package · purlins & girts · roof and wall cladding · gutter and downpipe system · roof safety mesh · insulation · sliding doors · precast concrete panels · skylights · personal access doors · base flashings · intermediate mullions

Обзор проекта

A drive-through grain store, shaped by intake rate and a permitting delay rather than by tonnage.

SynJect delivered a 4,717 m² structural steel grain storage shed in Egypt — an 89 × 53 × 9.5 m clear-span envelope with a 3.2 m grain-retaining wall base, built so the header never stops for a truck.

At 90–110 tonnes per hour, one combine fills a road train faster than the intake queue can clear. The 9.5 m eaves height was therefore driven by the angle of repose and loader reach, not by the site boundary — a taller shed buys far more usable cubic volume than a wider one.

Mid-design, the retaining strategy changed: rather than wait on a separate precast trade, we brought the precast panels and their intermediate mullions into our own scope, corrected purlin alignment and removed a set of unnecessary panel doors. Two trades became one line of accountability.

The permitting delay consumed the float, so the programme was rebuilt around off-site fabrication: every member arrived galvanised and numbered, and the erection crew closed the envelope before the wheat harvest. The shed now stores grain at peak and machinery off-season.

Фасад построенного зернохранилища площадью 4 717 м² с облицовкой цвета слоновой кости и карнизной отделкой цвета терракотовой бронзы в Египте

Четыре ключевых решения

01

Intake-Rate Sizing

Floor area and height were set against 90–110 t/h intake, not against a nominal tonnage figure.

02

Precast Brought In Scope

Retaining panels and mullions came under one supplier, collapsing two trades into a single programme.

03

Full-Height Door Bays

Both gable ends open to full eaves height so a road train tips forward and exits without reversing.

04

Skylight Band

Continuous roof skylights keep the interior lit through the day, so grain grading does not depend on luminaires.

Отзыв клиента

Feedback from Mahmoud El-Sayed after handover of the Egypt project.

SynJect fabrication and installation team holding a company banner in front of the completed grain storage shed in Egypt
Бригада по изготовлению и монтажу на объекте
“

We tip under cover, push the grain back and keep cutting. The queue at the door is gone.

Mahmoud El-SayedOperations Director · Delta Grain Logistics
90–110 t/h intake3.2 m retaining base100% bolted

Часто задаваемые вопросы

The questions growers and their engineers ask before committing to an on-farm grain store.

What does the 4,717 m² figure include?

The 89 × 53 m roofed envelope only. External hardstand, weighbridge and silo battery sit outside the steel package and are priced separately.

The lower purlins are spaced and sized for lateral grain pressure, and the sheeting is detailed with sealed laps over a 3.2 m base restraint. The load path runs through the girts into the portal frames — it is structural design, not a cosmetic substitute.

Grain stacks at its natural angle of repose, so usable volume grows faster with height than with floor area. The height also clears loader booms pushing grain back from the tipping point, and leaves room for machinery stored off-season.

Yes. The 53 m clear span has no internal columns and both gable ends open to full eaves height, so a vehicle enters, tips and exits forward without reversing in a congested yard.

The variables are intake rate, tipping clearance and retention height, all of which scale down. A shorter bay with the same column-free span behaves identically. Fix the harvest logistics before the slab is poured, not after.

Получите круглосуточный перечень работ и смету

Узнайте, на каком объеме стального проката и морских перевозок вы сможете сэкономить до начала изготовления

8–15%

Сокращение веса стальных конструкций

3D-моделирование в Tekla в масштабе 1:1 позволяет оптимизировать соотношение балок и колонн, что позволяет избежать излишних затрат на материалы.

0,0 мм

Верификация кода с нулевым количеством конфликтов

Проверено на соответствие стандарту EN 1090 и местным ветровым и сейсмическим нагрузкам.

100%

Обзор «от инженера к инженеру»

Проверено нашими ведущими инженерами — никаких назойливых коммерческих звонков, только полезные данные и цены от производителя.

CE EN 1090-1•ISO 9001•ISO 14001•ISO 45001

Служба технической поддержки и консультаций

Ведущие инженеры онлайн

Чертежи
Чертежи

🔒 100% конфиденциальность и безопасность, без спама