Agricultural Steel Sheds · Egypt

4,717 m² Grain Storage Shed

An 89 × 53 m clear-span envelope, modelled in 3D and delivered fully hot-dip galvanised — sized to swallow 90–110 t/h of harvest intake without a truck queue at the door.

4,717 m²Covered storage
53 mالمسافة الحرة
9.5 mEaves height
90–110 t/hHarvest intake

بيانات المشروع

Facts a contractor checks first: Agricultural & Bulk Storage · grain store in Egypt — Clear-span steel portal frame, 89 × 53 × 9.5 m · 4,717 m².

حقائق ومواصفات المشروع
الصناعةAgricultural & Bulk Storage · grain store — harvest buffer + off-season machinery
نوع البناءClear-span steel portal frame — hot-dip galvanised, bolted on site
حجم المشروع89 × 53 × 9.5 m · 4,717 m² — 3.2 m grain-retaining wall base
الموقعNorth Africa, Egypt — irrigated delta farmland
المتعاونونFarming group · structural engineer · precast supplier · erection crew — four-party coordination
التسليمSingle-phase handover — ahead of the wheat harvest
نطاق عملناTekla 3D model · hot-dip galvanised steel package · purlins & girts · roof and wall cladding · gutter and downpipe system · roof safety mesh · insulation · sliding doors · precast concrete panels · skylights · personal access doors · base flashings · intermediate mullions

نظرة عامة على المشروع

A drive-through grain store, shaped by intake rate and a permitting delay rather than by tonnage.

SynJect delivered a 4,717 m² structural steel grain storage shed in Egypt — an 89 × 53 × 9.5 m clear-span envelope with a 3.2 m grain-retaining wall base, built so the header never stops for a truck.

At 90–110 tonnes per hour, one combine fills a road train faster than the intake queue can clear. The 9.5 m eaves height was therefore driven by the angle of repose and loader reach, not by the site boundary — a taller shed buys far more usable cubic volume than a wider one.

Mid-design, the retaining strategy changed: rather than wait on a separate precast trade, we brought the precast panels and their intermediate mullions into our own scope, corrected purlin alignment and removed a set of unnecessary panel doors. Two trades became one line of accountability.

The permitting delay consumed the float, so the programme was rebuilt around off-site fabrication: every member arrived galvanised and numbered, and the erection crew closed the envelope before the wheat harvest. The shed now stores grain at peak and machinery off-season.

الواجهة الأمامية لمستودع تخزين الحبوب الذي تم الانتهاء من بنائه بمساحة 4,717 م²، والمكسو بكسوة بيضاء عاجية وحواف سقف بلون برونزي تيراكوتا في مصر

أربعة قرارات حاسمة

01

Intake-Rate Sizing

Floor area and height were set against 90–110 t/h intake, not against a nominal tonnage figure.

02

Precast Brought In Scope

Retaining panels and mullions came under one supplier, collapsing two trades into a single programme.

03

Full-Height Door Bays

Both gable ends open to full eaves height so a road train tips forward and exits without reversing.

04

Skylight Band

Continuous roof skylights keep the interior lit through the day, so grain grading does not depend on luminaires.

شهادة العميل

Feedback from Mahmoud El-Sayed after handover of the Egypt project.

SynJect fabrication and installation team holding a company banner in front of the completed grain storage shed in Egypt
فريق التصنيع والتركيب في الموقع
“

We tip under cover, push the grain back and keep cutting. The queue at the door is gone.

Mahmoud El-SayedOperations Director · Delta Grain Logistics
90–110 t/h intake3.2 m retaining base100% bolted

الأسئلة الشائعة

The questions growers and their engineers ask before committing to an on-farm grain store.

What does the 4,717 m² figure include?

The 89 × 53 m roofed envelope only. External hardstand, weighbridge and silo battery sit outside the steel package and are priced separately.

The lower purlins are spaced and sized for lateral grain pressure, and the sheeting is detailed with sealed laps over a 3.2 m base restraint. The load path runs through the girts into the portal frames — it is structural design, not a cosmetic substitute.

Grain stacks at its natural angle of repose, so usable volume grows faster with height than with floor area. The height also clears loader booms pushing grain back from the tipping point, and leaves room for machinery stored off-season.

Yes. The 53 m clear span has no internal columns and both gable ends open to full eaves height, so a vehicle enters, tips and exits forward without reversing in a congested yard.

The variables are intake rate, tipping clearance and retention height, all of which scale down. A shorter bay with the same column-free span behaves identically. Fix the harvest logistics before the slab is poured, not after.

احصل على قائمة الأعمال المطلوبة وخطة التكاليف على مدار 24 ساعة

اكتشف مقدار ما يمكنك توفيره من حمولة الصلب والشحن البحري قبل بدء عملية التصنيع

8–15%

تخفيض وزن الفولاذ

1:1 تعمل النمذجة ثلاثية الأبعاد باستخدام برنامج Tekla على تحسين نسب العوارض والأعمدة للتخلص من التكاليف الزائدة للمواد.

0.0 ملم

التحقق من الكود الخالي من التضارب

تم التحقق من مطابقتها لمعيار EN 1090 والأحمال المحلية الناتجة عن الرياح والزلازل.

100%

مراجعة من مهندس إلى مهندس

تم التحقق من صحة هذه المعلومات من قِبل كبار مهندسينا — لا مكالمات مبيعاتية مزعجة على الإطلاق، بل بيانات قابلة للتطبيق وأسعار المصنع فقط.

CE EN 1090-1•ISO 9001•ISO 14001•ISO 45001

مكتب الهندسة والاستفسارات

المهندسون الرئيسيون عبر الإنترنت

الرسومات
الرسومات

🔒 خصوصية وأمان بنسبة 100٪، بدون رسائل غير مرغوب فيها