Steel Public Building · Oman

820 m² School Gym & Auditorium, Oman

A 24 m column-free span gives the school one hall that works as a sports court, an assembly room and a performance space in Oman.

820 m²Under roof
24 mClear span
95 tStructural steel
6 weeksOn site

Project Facts

Facts a contractor checks first: Education, sport and community assembly - Single-storey long-span portal frame with flat-pitched roof, 820 m² under roof, 24 m clear span.

Project facts and specifications
IndustryEducation, sport and community assembly - one hall used for courts, assemblies and performances
Construction typeSingle-storey long-span portal frame with flat-pitched roof - warm white cladding, terracotta-sand bands, deep bronze trims
Project scale820 m² under roof, 24 m clear span - 95 t of fabricated structural steel
LocationSchool campus, Oman - hot arid climate, high solar gain, blowing dust
CollaboratorsSchool estates team · local civil works - frame set around the court markings and seating zone
Delivery6 weeks on site - sports floor laid before the seating was commissioned
Our scopeStructural design and 3D modelling · 24 m clear-span portal frames · secondary steel and roof bracing · roof sheeting with high-level insulation · wall cladding with terracotta-sand bands · high-level window bands and personnel doors · deep bronze trims · gutters and downpipes · erection drawings and site support

Project Overview

A school cannot afford a building that only works for one timetable slot.

SynJect supplied 95 tonnes of structural steel for an 820 m² gym and auditorium in Oman, built around a 24 m column-free span. Basketball, assemblies and performances all use the same unobstructed floor, so the school never has to work the timetable around an internal column.

The frame follows the court. Roof bracing sits above the playing volume, high-level window bands bring daylight in without glare on the sprung floor, and the deep bronze door trims line up with the spectator and service entries.

The arid Omani site drives the detailing: a sealed warm-white envelope with gasketed trims against dust, insulated roof build-up against high solar gain, and galvanized steel on every exposed frame, lintel and canopy support.

Completed 820 m² school gym and auditorium in Oman seen from the air with a white flat-pitched roof and warm white walls

Four Decisions That Made It Work

01

Column-Free Court

A 24 m span keeps every line marking and seating layout usable.

02

High-Level Daylight

Window bands light the hall without glare on the playing floor.

03

Insulated Roof

A sealed insulated roof cut cooling load under high solar gain.

04

Dust-Tight Envelope

Gasketed warm-white cladding suits a hot, dusty campus.

Client Testimonial

Feedback from School Estates Director after handover.

SynJect erection crew in hard hats holding a red company banner on the paved forecourt of the school gym and auditorium in Oman
Fabrication and installation team on site
“

We run basketball in the morning and assembly after lunch. The clear span is the reason both fit without moving a single chair bank.

School Estates DirectorInternational school, Oman
820 m² under one roof24 m column-free spanThree-way shared hall

Frequently Asked Questions

Common questions from buyers specifying this building type.

How is an 820 m² school gym and auditorium in Oman quoted?

An 820 m² school gym and auditorium in Oman is quoted against an itemised bill of quantities rather than a flat rate per square metre, because clear span, eave height, roof insulation, wind and thermal loads, window bands, coating specification and delivery distance all change the steel tonnage that SynJect has to fabricate and ship. The BOQ separates primary frames, secondary steel, roof and wall sheeting, openings, trims, fasteners and coatings so each line can be compared between bidders. Send SynJect the span, eave height, seating layout and site location and the quantities come back itemised against those inputs.

The steel package for the 820 m² school gym in Oman covers structural design and 3D modelling, the 24 m clear-span portal frames, secondary steel and roof bracing, insulated roof sheeting, warm white wall cladding with terracotta-sand bands, high-level window bands, personnel doors and deep bronze trims as one coordinated supply. Earthworks, foundations, the sprung sports floor, telescopic seating, scoreboards, lighting, acoustics and utilities sat outside that package on this project. The table below shows the boundary as it was applied on the delivered hall. In the steel package Outside the package Clear-span frames, roof bracing, secondary steel Earthworks, foundations and ground-floor slab Insulated roof, wall cladding, window bands, trims Sprung sports floor and court markings Personnel doors, openings and canopies Telescopic seating, lighting and acoustics 3D model, shop drawings and erection drawings Local erection labour, cranes and permits

A steel school hall in Oman is designed to the local authority load requirements together with internationally recognised steel design standards for the frames, connections and coatings. For the delivered 820 m² hall, the design basis recorded the regional wind exposure, high solar gain, occupancy loading for assemblies and the thermal movement assumed across the long walls. Every SynJect project is modelled in 3D before fabrication, so connection schedules and code checks stay traceable from model to shop drawing. Ask for the design basis report with the BOQ and the assumptions are visible before cutting starts.

Fabrication, shipping and erection for an Oman school hall project run as one coordinated sequence: SynJect fabricates and trial-assembles the frames at the works, ships members in erection order, and hands the site team a crane study plus marked erection drawings before the first lift. On this hall, the long-span frames went up first so the roof could be made weather-tight before the sports floor was laid. The sequencing plan, crane study and erection drawings are part of the SynJect package, so local contractors price lifts against drawings.

A 24 m column-free span suits a shared gym and auditorium because court markings, assembly layouts and performance staging all need an unobstructed rectangle. Removing internal columns also keeps sightlines clear from temporary seating, so the same floor can be reconfigured between morning sport and afternoon assembly without any structural constraint. The trade-off is heavier rafters and connections than a columned hall of the same footprint, which the BOQ prices out explicitly. If the layout is fixed for life, a columned frame is cheaper; if it changes weekly, the clear span pays for itself.

Heat, dust and glare in the delivered Oman hall are handled by the envelope: an insulated roof build-up against high solar gain, sealed warm-white cladding with gasketed trims against blowing dust, and high-level window bands that bring daylight in above the playing sightline so players never face direct low-angle sun. Window band positions were fixed in the 3D model before fabrication, so they never clash with bracing or purlins. Mechanical cooling and lighting belong to the services package, but their loads were allowed for in the roof design basis.

The sprung sports floor and telescopic seating under a school hall sit outside the SynJect steel package and are installed by specialist contractors against our hold-down and slab details. On the Oman hall, floor build-up, court marking tolerances, seating anchor loads and slab flatness were agreed between the packages before the slab was specified. The sports floor supplier sets those tolerances, not the frame, so their shop drawings have to be signed off early. Request the interface drawing set with the BOQ and the steel-to-floor boundary becomes unambiguous.

The 820 m² figure covers everything under roof on the delivered project in Oman: the full column-free playing hall, the assembly and performance zone and the covered service entry inside the building line. External paved forecourts, the campus walkway, planting and yard drainage are excluded from that number. Quoting area this way makes bids directly comparable, because one supplier cannot hide the service entry outside the total. Ask any bidder to state hall area and covered entry separately before comparing tonnages.

The flat-pitched insulated roof on this Oman school hall keeps the enclosed volume tight above the playing area, so cooling load stays down, while still giving a defined fall to the eave gutters. A shallow pitch also keeps the high-level window band at a constant head height along the full length of the court. A steep gable would add unconditioned volume above the court without adding usable floor space. Roof falls and gutter positions were fixed in the 3D model before fabrication.

The Oman school hall can be extended by repeating a portal bay at the gable end, because the end frame was detailed as a removable future-extension frame, not a permanent braced wall. Roof sheeting, cladding, window bands and purlins all run to the same grid, so a new bay continues the envelope with no step in the roof line. SynJect recorded the extension assumptions in the design basis, including the extra bay load and the future downpipe position. Confirm the extension bay in the first BOQ and the end-frame connections are fabricated ready for it.

Get Your 24-Hour BOQ and Cost Plan

See how much steel tonnage and ocean freight you can save before fabrication begins

8–15%

Steel Weight Savings

1:1 Tekla 3D modeling optimizes beam-column ratios to eliminate redundant material costs.

0.0mm

Zero-Clash Code Verification

Checked against EN 1090 and local wind/seismic loads.

100%

Engineer-to-Engineer Review

Verified by our lead engineers—Zero pushy sales calls, Just actionable data and factory price.

CE EN 1090-1•ISO 9001•ISO 14001•ISO 45001

Engineering & Inquiry Desk

Lead Engineers Online

Drawings
Drawings

🔒 100% Private and Secure, No Spam