Agricultural Steel Sheds · Ghana

36,000 m² Climate-Controlled Agro-Processing Complex

Fabricated in Central Agricultural Export Corridor. PU topcoat, shop assembly. Handed Over 21 Days Ahead of Harvest Intake Deadline.

36,000 m²Floor Area
5,200 tSteel Tonnage
180 mmStorm Proofing
21 DaysTime Saved

بيانات المشروع

المعلومات التجارية والتقنية التي يتحقق منها المقاول قبل طلب الرسومات.

حقائق ومواصفات المشروع
الصناعةClimate-Controlled Agro-Processing & Cold Chain
الموقعCentral Agricultural Export Corridor, Ghana
نوع البناءHeavy-Duty Single-Span Portal Frame & Extensive Loading Canopy
Project Scale36,000 sqm GFA (~5,200 Tons Structural Steel)
بيئة الخدمةC4-High Durability (Polyurethane Barrier System)
Delivery ResultHanded Over 21 Days Ahead of Harvest Intake Deadline
نطاق عملناFabrication, PU topcoat, shop assembly and delivery

نظرة عامة على المشروع

How the structure was engineered, fabricated and delivered in Central Agricultural Export Corridor.

Located in Ghana’s fertile agricultural export belt, this mega agro-processing facility provides continuous climate-controlled sorting, drying, packaging, and cold storage for high-value export produce. For the agro-industrial client and EPC management, the commercial stakes were tightly bound to the seasonal harvest clock.

In equatorial West Africa, intense ambient radiation pushes exterior roof temperatures past +60°C, accompanied by sudden tropical monsoons with torrential rainfall. The primary operational anxiety was structural thermal bridging and envelope leakage.

If the heavy structural steel frame lacked integrated thermal break isolators, radiant heat would bleed into the low-temperature workshops, overloading industrial chillers, skyrocketing electricity costs, and causing condensation dripping that ruins dry produce. Furthermore, the facility demanded an ultra-long cantilevered steel canopy to shelter the intense activity of the multi-bay loading docks from torrential downpours.

Dimensions, codes, inspection rates and schedule outcomes for this project are recorded in the Project Facts table above, so they can be checked before an enquiry is issued.

مجمع لتجهيز المنتجات الزراعية بمساحة 36,000 متر مربع مزود بنظام تحكم في المناخ في غانا: عزل الجسور الحرارية، ومقاومة العواصف الاستوائية، والتشغيل السريع بنظام «تسليم المفتاح»

أربعة قرارات حاسمة

01

Integrated Thermal-Bridge Isolation

Pre-engineered high-density elastomeric thermal pads at all structural steel interfaces eliminate radiant heat transmission, preventing internal condensation drips and reducing refrigeration power consumption by up to 25%.

02

Massive Loading Dock Canopy

An ultra-long, structurally reinforced cantilevered steel canopy shields the entire row of docking bays, ensuring uninterrupted, dry logistics operations even during violent tropical storms.

03

استراتيجية مكافحة التآكل

C4 coating selected for the service environment recorded in the Project Facts.

04

Connection Design

100% pre-drilled bolted connections, trialled in the shop, so the frame goes up without site welding.

شهادة العميل

التعليقات التي تم تسجيلها من العميل بعد تسليم المشروع.

فريق التصنيع والتركيب عند تسليم المشروع
“

Building in Ghana meant racing against the harvest window. Any thermal leak aloft would drop condensation and ruin our produce, while misplaced bolt holes would halt remote cranes. Shijie solved it: 36,000 sqm of curved steel bolted aloft with zero torch cuts, holding bone-dry and drip-free during violent rainstorms.

Kwabena O.Managing Director, Agro-Industrial Logistics Hub (Ghana)
36,000 m²5,200 t180 mm

الأسئلة الشائعة

الأسئلة التي يطرحها المهندسون قبل الالتزام بنطاق عمل كهذا.

What was built for this Ghanaian agro exporter?

A 36,000 sqm climate-controlled processing complex in Ghana’s agricultural export corridor on roughly 5,200 tons of steel, covering sorting, drying, packaging and cold storage for high-value export produce under one envelope.

Two measures work together: high-density elastomeric thermal pads at every steel-to-panel interface break the conduction path through the frame, and the envelope is built to U 0.22 W/m2K or better. Without thermal breaks, the steel becomes a radiator inside the cold room.

The arch vault spans the sorting and drying halls without internal columns, giving clear operational floor area while keeping foundation loads low. Curved members are formed on 3D CNC pipe benders and laser-verified in the shop so the vault closes cleanly on site.

The envelope is a 360-degree double-lock standing seam system with concealed sliding clips, rated above 180mm/h of rainfall. There are no exposed fastener holes, so neither sheet-flow leakage nor wind uplift can start at a fixing point.

Yes, that was the design premise. All flanged connections are CNC-cut with guide dowels and trial-fitted in 3D at the factory, so site work is first-pass bolting with zero field cutting, reaming, or waiting on a machine shop.

احصل على قائمة الأعمال المطلوبة وخطة التكاليف على مدار 24 ساعة

اكتشف مقدار ما يمكنك توفيره من حمولة الصلب والشحن البحري قبل بدء عملية التصنيع

8–15%

تخفيض وزن الفولاذ

1:1 تعمل النمذجة ثلاثية الأبعاد باستخدام برنامج Tekla على تحسين نسب العوارض والأعمدة للتخلص من التكاليف الزائدة للمواد.

0.0 ملم

التحقق من الكود الخالي من التضارب

تم التحقق من مطابقتها لمعيار EN 1090 والأحمال المحلية الناتجة عن الرياح والزلازل.

100%

مراجعة من مهندس إلى مهندس

تم التحقق من صحة هذه المعلومات من قِبل كبار مهندسينا — لا مكالمات مبيعاتية مزعجة على الإطلاق، بل بيانات قابلة للتطبيق وأسعار المصنع فقط.

CE EN 1090-1•ISO 9001•ISO 14001•ISO 45001

مكتب الهندسة والاستفسارات

المهندسون الرئيسيون عبر الإنترنت

الرسومات
الرسومات

🔒 خصوصية وأمان بنسبة 100٪، بدون رسائل غير مرغوب فيها