Industrial Steel Buildings · Kuwait

Pabrik Penggilingan Padi seluas 8.460 m², Kuwait

A repeated multi-bay steel envelope keeps grain intake, milling and bagging under one dust-sealed roof in Kuwait.

8,460 m²Di bawah atap
6 baysRepeated roof bays
620 tStructural steel
19 weeksDi lokasi

Data proyek

Facts a contractor checks first: Rice milling and grain processing - Single-storey multi-bay portal frame, 8,460 m² under roof, six repeated bays.

Fakta dan spesifikasi proyek
IndustriRice milling and grain processing - intake, drying, milling, bagging and palletised dispatch
Jenis konstruksiSingle-storey multi-bay portal frame - misty blue-grey cladding, silver-grey roofs, navy trims
Skala proyek8,460 m² under roof, six repeated bays - 620 t of fabricated structural steel
LokasiInland industrial site, Kuwait - hot arid desert climate, windblown sand, high summer temperatures
MitraLocal civil works · milling equipment supplier - frame set around the processing line and the loading apron
Pengiriman19 weeks on site - first two bays handed over before the intake hall
Ruang lingkup kamiStructural design and 3D modelling · repeated portal-frame bays · secondary steel and roof bracing · silver-grey roof sheeting with gutters · misty blue-grey wall cladding with navy trims · dust-sealed intake and loading openings · high-level window bands · downpipes · erection drawings and site support

Gambaran umum proyek

A rice mill works best when the whole process line sits under a single unobstructed roof.

SynJect supplied 620 tonnes of structural steel for an 8,460 m² rice mill factory in Kuwait, built as six repeated portal-frame bays that carry one continuous processing line from grain intake to bagged dispatch. No internal column interrupts the milling equipment or the pallet run.

Yang frame follows the bay grid. Each bay repeats the same eave height, purlin centres and cladding profile, so roof sheeting, high-level window bands and the navy door trims stay identical across the whole building. Intake and loading openings sit on the long elevations where trucks can reach them without crossing the process line.

The desert site drives the detailing: sealed misty blue-grey cladding with gasketed trims keeps windblown sand out of the milling hall, light-coloured silver-grey roof sheets limit solar gain, and every exposed lintel, gutter and downpipe is galvanized against the dry heat.

Telah menyelesaikan pembangunan pabrik penggilingan beras seluas 8.460 m² di Kuwait yang dilengkapi dengan enam bagian atap berwarna biru-abu-abu kabut dan aksen berwarna biru tua

Empat keputusan penentu

01

Repeated Bay Grid

Identical bays keep frames, sheets and trims standard.

02

Column-Free Hall

The milling line runs without a single internal column.

03

Sand-Sealed Envelope

Gasketed trims and sealed openings keep dust out.

04

Solar-Reflective Roof

Light silver-grey sheeting limits heat gain in summer.

Testimoni klien

Feedback from Projects Director after handover.

SynJect erection crew in hard hats holding a red company banner in front of the completed rice mill factory in Kuwait
Tim fabrikasi dan pemasangan di lokasi
“

Six identical bays meant one set of erection drawings and no surprises when the milling line was set out.

Projects DirectorGrain processing operator, Kuwait
8,460 m² under one roofSix repeated portal baysColumn-free milling hall

Pertanyaan umum

Pertanyaan umum dari pembeli yang memilih tipe bangunan ini.

How is an 8,460 m² rice mill factory in Kuwait quoted?

An 8,460 m² rice mill factory in Kuwait is quoted against an itemised bill of quantities rather than a flat rate per square metre, because bay width, eave height, intake opening count, wind and sand loads, roof insulation, coating specification and delivery distance all change the steel tonnage that SynJect has to fabricate and ship. The BOQ separates primary frames, secondary steel, roof and wall sheeting, openings, high-level window bands, trims, fasteners and coatings so each line can be compared between bidders. Send SynJect the process-line layout, eave height and site location and the quantities come back itemised against those inputs.

The steel package for the 8,460 m² mill in Kuwait covers structural design and 3D modelling, the six repeated portal-frame bays, secondary steel and roof bracing, silver-grey roof sheeting with gutters, misty blue-grey wall cladding with navy trims, the dust-sealed intake and loading openings and the high-level window bands as one coordinated supply. Earthworks, foundations, the floor slab, milling and drying equipment, dust extraction plant, utilities and intake automation sat outside that package on this project. The table below shows the boundary as it was applied on the delivered mill. In the steel package Outside the package Repeated portal frames, bracing and secondary steel Earthworks, foundations and ground-floor slab Roof sheeting, wall cladding, gutters and trims Milling, drying and bagging equipment Intake and loading openings, high window bands Dust extraction plant and process utilities 3D model, shop drawings and erection drawings Local erection labour, cranes and permits

A steel mill building in Kuwait is designed to the local authority load requirements together with internationally recognised steel design standards for the frames, connections and coatings. For the delivered 8,460 m² mill, the design basis recorded high wind and windblown sand exposure, extreme summer temperatures, intake-opening lintel loads and the coating assumptions used for the desert site. Every SynJect project is modelled in 3D before fabrication, so connection schedules and code checks stay traceable from model to shop drawing. Ask for the design basis report with the BOQ and the assumptions are visible before cutting starts.

Fabrication, shipping and erection for a Kuwait rice mill run as one coordinated sequence: SynJect fabricates and trial-assembles the repeated frames at the works, ships members in erection order, and hands the site team a crane study plus marked erection drawings before the first lift. On this mill, the first two bays were framed and clad before the intake hall, so the equipment contractor could start setting out the line early. The sequencing plan, crane study and erection drawings are part of the SynJect package, so local contractors price lifts against drawings.

Repeated narrow bays suit a rice mill because they keep rafter sections, purlin centres and cladding panels identical across the whole roof, which shortens fabrication and makes later maintenance predictable. A six-bay grid also lets the structure be erected in stages while the processing line is still being installed. Each bay is column-free along the process line, so the milling equipment and pallet run stay unobstructed inside the hall. One very wide span would need heavier primary members and a longer erection programme without adding usable floor space.

Desert heat and windblown sand in the delivered Kuwait mill are handled at roof and wall level: light silver-grey roof sheeting reflects solar gain, sealed misty blue-grey cladding with gasketed trims keeps fine dust out of the hall, and intake and loading openings close behind dust-sealed doors sized in the frame. High-level window bands admit daylight without putting large glazed areas in the path of driven sand. Dust extraction equipment belongs to the process package, but its duct penetrations were coordinated in the 3D model before fabrication.

The floor slab and the milling equipment foundations at a rice mill sit outside the SynJect steel package and are delivered by the local civil contractor against our hold-down and base-plate details. On the Kuwait mill, equipment loads, slab levels and the pallet-run layout were agreed between the packages before the slab was specified. The equipment supplier sets the machine footprint, not the frame, so the interface has to be signed off early. Request the interface drawing set with the BOQ and the steel-to-slab boundary becomes unambiguous.

The 8,460 m² figure covers everything under roof on the delivered project in Kuwait: all six processing bays, the grain intake zone, the milling line and the bagged-dispatch area inside the building line. The open truck apron, perimeter road, yard drainage and any free-standing silos are excluded from that number. Quoting area this way makes bids directly comparable, because one supplier cannot hide the intake zone outside the total. Ask any bidder to split processing bays and intake zone in the same manner before comparing tonnages.

The intake and loading openings on this Kuwait mill sit on the long elevations so grain trucks and dispatch vehicles reach the process line from the outer apron without crossing the milling equipment inside. The openings repeat at the bay grid, which keeps every lintel and door trim identical across the six bays. Truck movement was kept outside the building envelope, so no internal aisle had to be reserved for vehicles. Because the openings follow the frame grid, an extra bay can be added later without changing the door schedule.

More bays can be added at the gable end of this Kuwait mill, because the end frame was detailed as a removable future-extension frame, not a permanent braced wall. Roof sheeting, cladding, window-band height and purlin centres all run to the same grid, so a new bay continues the envelope with no step in the roof line. SynJect recorded the extension assumptions in the design basis, including the extra bay load and the future downpipe position. Confirm the extension bay in the first BOQ and the end-frame connections are fabricated ready for it.

Dapatkan BOQ dan Rencana Biaya 24 Jam Anda

Lihat seberapa banyak tonase baja dan biaya pengiriman laut yang dapat Anda hemat sebelum proses fabrikasi dimulai

8–15%

Penghematan Berat Baja

Pemodelan 3D Tekla dengan skala 1:1 mengoptimalkan rasio balok-kolom untuk menghilangkan biaya bahan yang berlebihan.

0,0 mm

Verifikasi Kode Tanpa Konflik

Telah diverifikasi sesuai dengan standar EN 1090 serta beban angin dan gempa setempat.

100%

Tinjauan Antar-Insinyur

Telah diverifikasi oleh para insinyur utama kami—Tanpa panggilan penjualan yang memaksa, hanya data yang dapat ditindaklanjuti dan harga pabrik.

CE EN 1090-1•ISO 9001•ISO 14001•ISO 45001

Meja Layanan Teknik & Pertanyaan

Insinyur Utama Online

Gambar
Gambar

🔒 100% Pribadi dan Aman, Tanpa Spam